Solutions for brush plating

[ Date:2016-06-30 Click: ]
solution for brush plating
We can supply all kinds of solutions for brush plating. 
such as copper plating solution, neckel plating solution, tin plating solution, gold plating solution, silver plating solution, chrome plating solution.

For repairing you need the basic solutions as follows
Electrocleaning
Main Chemical Ingredients: Sodium Hydroxide, Sodium Carbonate, Trisodium Phosphate;
Application: Used to remove oil from metal work piece surface;
Working Environment: 6-14V voltage, take work piece as cathode during operation;
 
Activator #2
Main Chemical Ingredients: Sodium Chloride, Hydrochloric Acid;
Application: Used to remove Oxide film from metal work piece surface;
Working Environment: 6-12V voltage, take work piece as anode during operation;
 
Activator #3
Main Chemical Ingredients: Citric Acid, Sodium Citrate, Nickel Chloride;
Application: For carbon steel, cast iron or high carbon containing alloy steel, there will have gray-black dirt left after Activator #2 process. Activator #3 is used to remove the residual dirt.
Working Environment: 8-15V voltage, take work piece as anode during operation;
 
Under-layer Nickel
Main Chemical Ingredients: Nickel Chloride, Nickel Sulfate, Hydrochloric Acid, Acetic Acid;
Application: Used as bottom layer, to improve bonding strength between coating and base material;
Working Environment: 6-15V voltage, take work piece as cathode during operation;
Before plating (without electricity), wipe work piece by anodes and plating pen.
 
Nickel #3
Main Chemical Ingredients: Nickel Sulfate, Ammonium Citrate, Ammonia;
Application: Used for high speed deposition and heavy build working layer, used for large-sized tolerance work piece repairing;
Working Environment: 7-15V voltage, take work piece as cathode during operation;
Before plating (without electricity), wipe work piece by anodes and plating pen.
 
Copper #11
Main Chemical Ingredients: Basic Cupric Carbonate,Copper Methanesulfonate, Ethylenediamine;
Application: Used for high speed deposition and heavy build (more than 1mm) copper coating, especially suitable for printing roller pressure pits, scratches, hydraulic pillar strain etc serious damaged work piece repairing.
Working Environment: 6-17V voltage, take work piece as cathode during operation; before plating (without electricity), wipe work piece by anodes and plating pen.
CopyRight 2012-2016 All Right Reserved Fast Electrodeposition & Ideal Surface Technology Co., Ltd (FEIST)  TEL:+86-29-88442755 Address:#127, West YouYi Road, Xian City, Shanxi Province, China